skip to Main Content
86-0769-33365786 info@otschina.com.cn
2 Tensile Machine

Common Problems and Troubleshooting Methods of Universal Testing Machine

1, Universal testing machine power supply, but the equipment can not move up and down.
Exclusion methods:
Check whether it is 15S after the equipment is still unable to move, because the host needs to open the machine to check, about 15S time; check the upper and lower limits are again appropriate position, there is a certain operating space; check the access test machine power voltage is normal.
Maybe there are other problems that we need to solve in our daily life.
2, Universal testing machine mainframe power is not bright, and equipment can not move up and down.
Exclusion methods:
Check whether the power line of the access test machine is connected to normal; check whether the stop switch is in the unscrewed state; check whether the power supply voltage of the universal pull test machine is normal; check if the insurance on the socket is burned, please take out the spare fuse and install it.
3, Universal testing machine mainframe power is not bright, and can not move up and down. The solution to the pull machine is to check whether the power line of the access test machine is connected to normal; check whether the emergency switch is in a screwing state; check whether the power supply voltage of the access test machine is normal; check if the insurance on the socket is burned, please take out the spare fuse and install it.
4. The solution of the universal pull machine is to check whether the communication line between the computer and the test machine falls off; check whether the on-line selection sensor is correct or not; check whether the tension machine sensor has been hit when the tension machine has the latest test or operation of the keyboard; the computer universal test machine has used the calibration or calibration of the software before checking the problems. Function; check whether the computer tensile testing machine manually changes the calibration value, the calibration value of the tension machine or other information in the hardware parameters.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top