skip to Main Content
86-0769-33365786 info@otschina.com.cn
How To Choose The IPX Level For LED

Dust Test Chamber

Dust Test Chamber is designed and manufactured according to GB2423.37 -89,GB4208-93 (equivalent to IEC60529-2001) Class of Shell Protection (IP Code). It is suitable for dust testing of electrical products with first digit characteristic numbers of 5 and 6 (IPX5 and IPX6).

Dust test chamber can provide non-laminar flow of dust carrying vertical circulation flow, can be controlled at regular time, and can be configured with vacuum pump to pump air in the shell of the tested product, and can adjust the exhaust volume and pressure difference. In addition, the airflow temperature control device is arranged in the box to ensure that the test is carried out under the environmental conditions required by the standard.

According to the standard requirements, the dust prevention ability of the test samples is tested by artificial simulated dust environment. The specific requirements and eligibility criteria should be in accordance with GB2423.37-89,GB4208-93 (IEC60529-2001) or product standards.

Specification

Structure
The structure and working principle of Dust Test Chamber is same as GB4208-93 (IEC60529-2001).

In the same way, an airflow heating device is added for use in lower ambient temperature or higher humidity. When the system is working, the standard talc powder is put into the sand and dust box according to 2kg/M3 first, then put into the sample, and then start the fan, so that the workroom can form a high density dust fog until the set running time (usually 8 hours).

If you have any interest of the products above, or if you need any professional advice of those machines, welcome to contact us.
E-mail:info@otschina.com.cn
Tel:0769-33365786 Fax:0769-23051693

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top