During the products handling or transport process, there may be drop/ fall, which results in damage within the products. And this device simulates the drop/ fall of a finished product to evaluate the damage. All the rhombohedrons, angles and faces of the products can be tested.
- Carton box
- Corrugated case
|Type||Double arm supporting the specimen|
|Test space||1200*1700*1500mm (W*D*H)|
|Max. specimen weight||60 KG|
|Base plate size||1200*1400mm|
|Single Arm size||300*750mm|
|Control method||By electronic controller box|
|Dropping method||Pneumatic cylinder|
|Height display||LCD display reads drop height|
|Height adjustment||Servo motor controlling precision guiding|
|Buffer type||Oil pressure absorbability|
|Power||AC220V 50Hz 1 Phase|
|Comply with ISTA-1A ISO2248-1972(E), JIS Z0202-87,GB/T4857, 5-92.|
1. The spindle is used by precision grinding shaft lever, high precision, good stability
2. LCD screen displays multi-parameter.
3. Power failure safety design, keeping the original state when the power is failed.
4. Up and down lifting limitation setting
5. Adopt single arm supports test object.
6. Swing arm system is controlled by air pressure.
7. Free adjust pressure and speed up to 2G with object weight.
8. Test elctronic parts, finished products or angle surfae of the package container.
9. Decompression change design, low noise.
10. Best after sales service: One year free parts maintenance.
11. Meet international test standards.
12. Customization is available & welcomed.