skip to Main Content
86-0769-33365786 info@otschina.com.cn

Temp Humidity and Salt Spray Combined Test Chamber

Temp Humidity and Salt Spray Combined Test Chamber 1

Introduction:

Composite Sal spray chamber is applicable for various kinds material’s surface treatment with temperature humidity and salt water spray, such as after coating, electroplate, inorganic and organic membrane dermal, negative pole with antirust oil treatment etc anti-corrosive treatment to test the corrosion-resistance of the product.Can also be used to external lighting and signal device and vehicle lamps shell protection. Walk in type salt spray test chamber is available for us.

Applications:

  • Metal Parts
  • Electronics
  • Car Spare Parts
  • Building Materials
  • Automotive parts
  • Aviation equipment
  • Photographic equipment

Specification:

Model XB-OTS-90 XB-OTS-120 XB-OTS-160 XB-OTS-200
Interior Test Chamber
Dimension(cm)(L×W×H)
90×50×60 120×80×50 160×100×50 200×100×50
Exterior Test Chamber Dimension(cm)(L×W×H) 141*145*140 190*165*140 200*190*140 240*200*140
Capacity of the chamber(L) 270L 480L 800L 1000L
Temperature&humidity of the operating environment +5°C~ +35°C / <85%RH
Air pressure 86~ 106Kpa
Lab. temperature NSS ACSS           35°C±1°C
CASS              50°C±1°C
Pressure barrel temperature NSS ACSS           47°C±1°C
CASS                63°C±1°C
Temperature&humidity
Control Accuracy
Test room temperature range: +0℃~+85℃ Relative humidity: 20%~98%RH(±3%)
Saturated barrel temperature: 47℃~70℃ Temperature/humidity  uniformity: ≤±2℃  ≤±3%
Temperature resolution: 0.01 ℃ Humidity Resolution: 0.1% RH
Temperature fluctuation: ± 0.5 ℃ Humidity fluctuation: ± 2% RH

Features:

1.Automatic / manual water system has automatically add the water level of the water level is low, the test is not interrupted. Water level is insufficient warning to ensure that the use of safety.
2.Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally fall on the specimen, and 4000 hours of continuous use, and to ensure that no crystalline salt obstruction.
3.Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.
4.Laboratory using direct steam heating, heating up fast, and even reduce the standby time, heating tubes with high corrosion-resistant titanium tubing.
5.Laboratory basket rack using plane indexing rack, can arbitrarily adjust the angle, four off the fog, and the fog direction completely consistent.

Quickly Quotation:


Back To Top