The artificial simulated salt spray test includes a neutral salt spray test, an acetate salt spray test, a copper salt accelerated acetate spray test, and an alternating salt spray test.
(1) The neutral salt spray test (NSS test) is one of the earliest accelerated corrosion test methods in the field of application. It uses a 5% aqueous solution of sodium chloride solution, and the pH of the solution is adjusted to a neutral range (6-7) as a solution for spraying. The test temperature is taken at 35 ° C, and the sedimentation rate of the salt spray is required to be between 1 and 2 ml / 80 cm 2 · h.
(2) The acetate spray test (ASS test) was developed on the basis of a neutral salt spray test. It is to add some glacial acetic acid to the 5% sodium chloride solution, so that the pH value of the solution is reduced to about 3, the solution becomes acidic, and the salt mist formed after the Zui also becomes acidic from the neutral salt spray. Its corrosion rate is about 3 times faster than the NSS test.
(3) Copper salt accelerated acetate spray test (CASS test) is a rapid salt spray corrosion test developed recently in foreign countries. The test temperature is 50 ° C. A small amount of copper salt - copper chloride is added to the salt solution to strongly induce corrosion. . Its corrosion rate is about 8 times that of the NSS test.
(4) The alternating salt spray test is a comprehensive salt spray test, which is actually a neutral salt spray test plus a constant damp heat test. It is mainly used in cavity-type machine products. Through the penetration of the tidal environment, salt spray corrosion is generated not only on the surface of the product but also inside the product. It is to alternate the product under the salt water and humid heat environment conditions, and finally check whether the electrical properties and mechanical properties of the whole product are changed.
All of the above is Xiaobao to share with you all the contents of the artificial simulated salt spray test.